You are here

Half Steps and Whole Steps

22 July, 2019 - 10:18
Available under Creative Commons-ShareAlike 4.0 International License. Download for free at http://cnx.org/contents/2ad74b7b-a72f-42a9-a31b-7e75542e54bd@3.74

The pitch of a note is how high or low it sounds. Musicians often find it useful to talk about how much higher or lower one note is than another. This distance between two pitches is called the interval between them. In Western music, the small interval from one note to the next closest note higher or lower is called a half step or semi-tone.

: Tmedia/image128.png
Figure 4.7 Half Steps
hree half-step intervals: between C and C sharp (or D flat); between E and F; and between G sharp (or A flat) and A. 

Listen to the half steps in the above Figure 4.7.

The intervals in Figure 4.7 look different on a staff; sometimes they are on the same line, sometimes not. But it is clear at the keyboard that in each case there is no note in between them.

So a scale that goes up or down by half steps, a chromatic scale, plays all the notes on both the white and black keys of a piano. It also plays all the notes easily available on most Western instruments. (A few instruments, like trombone7 and violin, can easily play pitches that aren't in the chromatic scale, but even they usually don't.)

:media/image129.png
Figure 4.8 One Octave Chromatic Scale
All intervals in a chromatic scale are half steps. The result is a scale that plays all the notes easily available on most instruments. 

Listen to a chromatic scale.

If you go up or down two half steps from one note to another, then those notes are a wholestep, or whole tone apart.

media/image130.png
Figure 4.9 Whole Steps
Three whole step intervals: between C and D; between E and F sharp; and between G sharp and A sharp (or A flat and B flat). 

A whole tone scale, a scale made only of whole steps, sounds very different from a chromatic scale.

media/image131.png
Figure 4.10 Whole Tone Scale
All intervals in a whole tone scale are whole steps.

Listen to a whole tone scale.

You can count any number of whole steps or half steps between notes; just remember to count all sharp or flat notes (the black keys on a keyboard) as well as all the natural notes (the white keys) that are in between.

Example

The interval between C and the F above it is 5 half steps, or two and a half steps.
 

media/image132.png
Figure 4.11 Going from C up to F takes five half-steps

Exercise 4.2:

Identify the intervals below in terms of half steps and whole steps. If you have trouble keeping track of the notes, use a piano keyboard, a written chromatic scale, or the chromatic fingerings for your instrument to count half steps.

media/image133.png
Figure 4.12 Exercise 4.2

Exercise 4.3:

Fill in the second note of the interval indicated in each measure. If you need staff paper for this exercise, you can print out this staff paper PDF file.

media/image134.png
Figure 4.13 Exercise 4.3